Çerez Örnek

Mechanical Test Instruments (Fatigue Instruments)

Mechanical (Fatigue) Test Instruments

Investigation of Material Behavior Under Repeated Loads

EHF-EV200k2-040-0A Device Image

SHIMADZU EHF-EV200k2-040-0A device

Description

Many materials are subjected to repeated loads and vibrations during use. While a single application of these loads may not cause any damage, cracks and eventual fractures can occur after a certain number of cycles under repeated stress. This Fatigue Testing Devices are used to detect surface cracking and subsequent failure. It plays a crucial role in determining the mechanical properties of metal, composite, polymer, and ceramic materials, and is essential for research and development studies.

Application Areas

  • Automotive Parts
  • Aircraft Components
  • Engines, Compressors, Turbine, Pump Components
  • Orthopedic and Dental Implants

Device Hardware and Technical Specifications (EHF-EV200k2-040-0A)

Brand: SHIMADZU

Model: EHF-EV200k2-040-0A

Test Types: Tensile, Compression, 3-Point Bending, Fatigue, Fracture

Dynamic Capacity: ± 200 kN

Static Capacity: 240 kN

Maximum Frequency: 20 Hz

Cylindrical Sample Diameter: 8-30 mm

Prismatic Sample Size: 0-20 mm

Compression Plate Diameter: 160 mm

3-Point Bending Distance: 120-240 mm

EHF-LV020K2-020 Device Image

SHIMADZU EHF-LV020K2-020 device

Device Hardware and Technical Specifications (EHF-LV020K2-020)

Brand: SHIMADZU

Model: EHF-LV020K2-020

Test Types: Tensile, Compression, 3 and 4-Point Bending, Fatigue, Fracture, High and Low Temperature

Dynamic Capacity: ± 20 kN

Static Capacity: 26 kN

Maximum Frequency: 50 Hz

Stroke Capacity: ±25 mm

Cylindrical Sample: 6-16 mm

Prismatic Sample Size: 0-12 mm

Compression Plate Diameter: 60 mm

3-Point Bending Distance: 30-100 mm

4-Point Bending Distance: 15-50 mm

Extensometer: 50 mm Gauge Length, ±25/-5 mm Travel

Clip Gauge

    High/Low Temperature: 5 mm Gauge Length, 5 mm Travel, Max 10 Hz

    Room Temperature: 3 mm Gauge Length, 5 mm Travel, Max 10 Hz

Thermostatic Chamber: -70 / +300°C

Fracture Toughness Clevis Jaw Pin Hole Diameter: 12.5 mm

Fracture Toughness Clevis Jaw Width: 25 mm

Fatigue Mechanical Testing Tensile Test Fracture Toughness

Please log in to the Erasis system to submit an analysis request.


Ege Üniversitesi

EGE UNIVERSITY